A319 performance

A319 takeoff and landing performance, from your SimBrief OFP

File an A319 in SimBrief and SkyNexus works out the takeoff and landing numbers for it: V-speeds, FLEX temperature, the flap setting that suits the runway and the margin on every runway distance. The model is an A319-112 with CFM56-5B6 engines, at a maximum takeoff weight of 75.5 t and a maximum landing weight of 62.5 t. It is free and runs in your browser next to the sim.

Updated

Every takeoff number you enter into the MCDU

  • V1, VR and V2 for CONF 1+F, 2 and 3. OPTIMUM checks all three and picks the flap that gives the largest margin on the runway.
  • FLEX temperature, up to 74 °C at sea level.
  • The takeoff distance and the accelerate-stop distance, and the maximum takeoff weight for the runway.
  • The result is laid out like the MCDU PERF TAKE OFF page, so you can type it straight across.

Landing speed and distance

For landing you get VAPP, the factored landing distance for dispatch and the actual landing distance you can expect on the day. Both CONF FULL and CONF 3 are covered. CONF 3 landings are shown as degraded. The briefing also predicts which runway exit you will make.

Flying an A319 with other engines

SimBrief A319 plans with any other engine, such as the CFM56-5B5, the CFM56-5B7 or the IAE V2524, are calculated with the CFM56-5B6 numbers. The result carries a note that says so and is marked DEGRADED.

Where the numbers come from

The takeoff model is checked against airline takeoff charts: V-speeds within 10 kt, takeoff weight within 3 % and FLEX within 5 °C. The landing distances are checked against airline landing tables and the rule in the manufacturer's flight manual, and agree within 3 %. The maximum weights come from airline fleet data, and the type certificate gives the background on the engine.

Every number has a help button that explains how it was worked out.

When a result is marked DEGRADED

Outside the range the model was checked in, SkyNexus still gives you a number, but marks it DEGRADED so you know to treat it with more care. That happens:

  • for a takeoff above 3 500 ft pressure altitude, or a landing above 5 000 ft
  • when the takeoff run or accelerate-stop distance available is shorter than 1 577 m
  • on sloped runways, beyond about 1 %
  • on snow, slush or ice
  • for light landings
  • on hot days where the climb limit sets the takeoff weight
  • for a flight plan whose engine is not the CFM56-5B6

This is for the sim

This is a tool for flight simulation and learning. Never use it for a real aircraft.

Flying something else?

Flying the Fenix or the ToLiss A319?

A319 performance FAQ

Is the A319 performance calculator free?
Yes. Create an account, enter your SimBrief Pilot ID and the performance tab is there for every A319 flight plan.
Which A319 does it model?
An A319-112 with CFM56-5B6 engines, at 75.5 t maximum takeoff weight and 62.5 t maximum landing weight. SimBrief's type code A319 picks the model. A flight plan with any other engine uses the same numbers, shows a note and is marked DEGRADED.
What does DEGRADED mean on an A319 result?
The calculation ran outside the range it was checked in, for example above 3 500 ft pressure altitude, on a runway with less than 1 577 m of takeoff run or accelerate-stop distance, on a slope beyond about 1 %, on snow, slush or ice, for a light landing, or on a hot day at the climb limit. The number is still there, but treat it with more care. Below 1 300 m of takeoff run or accelerate-stop distance the takeoff is outside the checked range altogether: it is marked OUT OF ENVELOPE and the verdict is NO-GO.
How accurate is it?
Takeoff V-speeds are within 10 kt of airline takeoff charts, takeoff weight within 3 % and FLEX within 5 °C. Landing distances are within 3 % of airline landing tables. It is not certified and must never be used for real flights.
Can I use it without SimBrief?
You can try the app with the built-in demo flight. For your own A319 flights it needs a SimBrief flight plan, which gives it the weight, runway and weather.

Get your numbers for the next departure

Free, in the browser, filled in from your SimBrief flight plan.

Open SkyNexus