EDDL Dusseldorf runways and takeoff performance

Runways at EDDL

The main direction is a set of two parallel runways (05R/23L and 05L/23R) on 053/233° true, so every runway points the same way and a strong crosswind affects all of them alike.

Lengths run from 2,700 m on 05L/23R to 3,000 m on 05R/23L, a difference of 300 m.

Displaced thresholds: 05R 300 m, 23L 300 m, 05L 300 m, 23R 300 m. A displaced threshold shortens the landing distance from that end, not the takeoff run.

Example takeoff performance

Flap setting, assumed temperature (FLEX) and V1/VR/V2 in knots for an A320ceo at 70 t and a 737-800 at 72 t, from the start of each runway of at least 1,800 m. Conditions are a standard day so runway length and airport elevation are what change: ISA temperature at the runway elevation, QNH 1013, calm wind, dry, no obstacles.

Runway length shows in the numbers: from 05R (3,000 m) the A320 example uses CONF 2 with an assumed temperature of 58 °C, while 05L (2,700 m) needs CONF 3 and 56 °C, so less thrust reduction.

At 147 ft above sea level the air is as dense as it gets, and the elevation costs nothing: the A320 example on 05R matches the same runway at sea level (CONF 2, 58 °C).

Near its maximum takeoff weight, at 77 t, the A320 example still gets CONF 2 with an assumed temperature of 49 °C from 05R (3,000 m). The limiting end is 23R (2,700 m), which needs CONF 2 with an assumed temperature of 47 °C. On a hot day at full weight that is the runway to check before you accept it from ATC.

The A320 V2 values include improved climb: with a long runway and a high assumed temperature, V2 is raised above its minimum so the one-engine climb gradient still holds. That is why V2 runs higher on the longer runways.

The 737-800 assumed temperature is at its FCOM maximum (marked max) from each runway end in the table, so at 72 t the runway is not what limits it.

An illustration for flight simulation, not for real-world operations. Your own numbers depend on weight, weather, runway condition, intersection and obstacles; SkyNexus computes them from your SimBrief plan and the live METAR. See the A320 performance calculator and the 737-800 performance calculator for how it works.

Flying EDDL on VATSIM

VATSIM Germany publishes a pilot briefing for Dusseldorf with local procedures. Read it before you file: VATSIM Germany EDDL briefing. In SkyNexus the division notes show up next to your departure briefing, with the live VATSIM and IVAO controllers along your route.

Nearby airports

• EHEH Eindhoven53 NM
• EBBR Brussels89 NM
• EHAM Amsterdam Schiphol96 NM
• EHRD Rotterdam The Hague96 NM

All airports

EDDL questions

How long is the longest runway at EDDL?

Runway 05R/23L at Dusseldorf is 3,000 m (9,842 ft) long and 45 m wide, surfaced in concrete.

What is the elevation of Dusseldorf?

Düsseldorf Airport sits at 147 ft above sea level. Elevation lowers air density, which raises true airspeed at a given V-speed and lengthens the takeoff run, so it matters for performance.

Which flap setting does an A320 use for takeoff at EDDL?

In our reference example (70 t, ISA, calm wind, dry runway, full length) the A320 uses CONF 2 or CONF 3 here. On a real day the answer moves with weight, temperature, wind and the runway condition; SkyNexus works it out from your SimBrief flight plan and the live METAR.

Which runway at EDDL limits a heavy A320 takeoff?

Near its maximum takeoff weight, at 77 t, the A320 example still gets CONF 2 with an assumed temperature of 49 °C from 05R (3,000 m). The limiting end is 23R (2,700 m), which needs CONF 2 with an assumed temperature of 47 °C. On a hot day at full weight that is the runway to check before you accept it from ATC.

Is there a VATSIM pilot briefing for EDDL?

Yes. VATSIM Germany publishes a pilot briefing for Dusseldorf with local procedures. SkyNexus links to it and shows the division notes next to your departure and arrival briefing.